August 5th, 2013
When I first conceived of this blog, I thought it would
primarily be a picture blog. Personally, I tend to enjoy those more, especially
when it comes to technical information. However, I've come to realize that
there has been some information that is not transmittable via pictures. Our friend, Tyge, who had an excellent blog,
once told me "Take notes and post them later.".
Unfortunately, I've not taken any notes, but I do
recall some important insights that I'd like to share. I've also recently been
listening to Ken Burns "The War" documentary about World War II. I mean no disrespect in doing this, but I'd
like to call my posts of random thoughts... Pallet Side Chat.
So, Pallet Side Chat #1 will be a list of insights I've had
through all of this. Hopefully, you won't read them with the voice of Jack
Handy in mind.
1. A reciprocating saw (think Sawzall) became my very best
friend in all of this. The Diablo flush cut blade proved to be the best for
separating pallet wood into useful pieces of lumber.
2. Beware that if you do the above, it only cuts the nails,
so most of the nail head remains. Aesthetically, this works for the overall
construction, however it doesn't take too many of these unnoticed pieces of
iron to dull an expensive table or chop saw blade.
3. Some of the wood I cut actually smelled like hot buttered
popcorn. Not the cheap home version, but the really tasty theater kind. Go
figure.
4. This probably goes without saying and should probably be
#1, wear safety glasses, or better yet, safety glasses and a clear face shield
when you use the table or skill saw. You only have one pair of eyes.
5. If you plan to build with pallets, you need to have the
space to store them while you build. We don't have much yard, so juggling where
to put the pallets until I needed them was an added challenge.
6. Just like when traveling in a foreign country, when it
comes to acquiring free pallets, you can't say 'Thank you" too much.
7. Linseed oil makes a great sealer for the wood. You don't
need the expensive wood sealing "products". I used a standard garden sprayer which is far
better than brushing it on. I recommend you thin it down a bit so it will spray
better and make the oil go farther. 1 part mineral spirits to 3 parts oil
worked for me, but I think you could use as much as 50/50 and get good
coverage. You have to wait until the rainy season has passed before doing this.
Also, rinse the wood first and let it dry overnight before oiling. Pallet wood
has a lot of residual dirt on it, believe it or not.
8. As you'll see from my pictures, I love Tiki torches and
firepits. However, linseed oil soaked wood is highly flammable. Please be
careful.
Until later....
